Home >> Products >>Industrial Switch >>Din Rail Managed Industrial Switch >>Layer 2/2+ Managed Industrial Switch >> ​Industrial L2+ 8-Port 10/100/1000Base-T+2-Port 1000Base-X SFP Managed Ethernet Switch
Product Detail

​Industrial L2+ 8-Port 10/100/1000Base-T+2-Port 1000Base-X SFP Managed Ethernet Switch

Industrial L2+ 8-Port 10/100/1000Base-T+2-Port 1000Base-X SFP Managed Ethernet Switch

Collect
  • Description
  • Ordering

Hardware Specifications

Fixed Port

8x10/100/1000Base-T RJ45 Ports+2x1000Base-X SFP Slots+1xConsole Port

 

 

 

 

 

 

 

 

Standard

Compliance

IEEE802.3:10Base-T

IEEE802.3u:100Base-TX Fast Ethetnet

IEEE802.3ab:1000Base-T Gigabit Ethernet

IEEE 802.3z:1000Base-SX/LX Gigabit Ethernet

IEEE802.3x flow control and back pressure

IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3az Energy Efficient Ethernet
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2

ITU G.8032 ERPS Ring

 

 

 

 

 

Switch Properties

Switching Capacity: 20Gbps

MAC Address Table: 8K

Packet Buffer Size:4.1M

Packet Forwarding Rate: 14.88Mpps@64bytes

CPU:500MHz

RAM:128M

Flash:16M

Jumbo Frame:10K

Flow Control:IEEE802.3x flow control in full-duplex mode and back pressure in half-duplex mode

Switching mode: Store and Forward(full wirespeed)


     Network Medium

10Base-T: Cat3,4,5 UTP(≤100 meters)

100Base-T: Cat5 UTP or better(≤100 meters)

1000Base-T: Cat5e,6 UTP or better(≤100 meters)

Fiber Port

2x1000Base-X SFP

LAN Port

8x10/100/1000Base-T RJ45

Transmission Distance

Twisted pair: 0-100m(CAT5e/CAT6)

Fiber Optic:0-80km(Based on Industrial Optical Transceiver choose)

 

Power Requirements

Input Voltage: Redundant dual DC12~57V

Connector: Removable 6 pin Termina Block

Protection:Overload protection/Reverse polarity protection/Redundancy prodection

 

 

LED Indicator

PWR,V1,V2:Power supply LED

HW:Ring network status LED

9,10:Fiber Port 9-10 SFP Optic Link LED

Giga/Orange:LAN Port 1-8 1000M Ethernet Link LED

Link/Green:LAN 1-8 10/100M Ethernet Link LED

 

 

Mechanical

Case: High-strength Aluminum Alloy

IP Rating: IP40 protection

Cooling way: Fanless design,natural cooling

Dimension: 160x130x45mm(LxWxH)

N.W/G.W: 1.15Kg/1.32Kg

Installation: DIN-Rai/Wall Mounted

 

Environmental

Working Temperature: -40°C~+80°C

Storage Temperature:-40°C~+85°C

Working Humidity: 5%~90% (non-condensing)

Storage Humidity: 5%~95%(non-condensing)

 

 

 

 

 

 

 

 

Industry Standard 

EMI:FCC Part 15 Subpart B Class A,EN 55024

EMS:

IEC61000-4-2(ESD):±8kV Contact discharge,±15kV Air discharge

IEC61000-4-3(RS):10V/m(80~1000MHz)

IEC61000-4-4(EFT): Power Port:±4kV; Data Port:±2kV

IEC61000-4-5(Surge):Power Port:common mode±4kV/differential mode±2kV; Data Port:common mode±6kV/differential mode±4kV

IEC61000-4-6((Radio frequency conduction):

3V (10kHz-150kHz); 10V (150kHz-80MHz)

IEC61000-4-8(Power frequency magnetic field):100A/m;1000A/m ,1s to 3s

IEC61000-4-9(Pulsed magnet field):1000A/m

IEC61000-4-10(Damped oscillation):30A/m  1MHz

IEC61000-4-12/18(Shockwave):CM 2.5kV,DM 1kV

IEC61000-4-16(Common mode conduction):30V (cont.), 300V (1s)

Shock:IEC 60068-2-27

Free fall:IEC 60068-2-32

Vibration:IEC 60068-2-6

MTBF

100,000 hours

Warranty

3 years

 

Software Specifications

Port

Port Shutdown

Support

Port Speed

Support auto negotiate,full-1000,full-100,half-100,full-10,half-10

Flow Control

support full-duplex IEEE 802.3x, half-duplex back pressure

Storm Control

Supports rate limit for broadcast, multicast, and DLF packets

Storm Constrain

Support the detection of broadcast packets,multicast packets or unicast packets on the port, shutdown the port if the rate is over the threshold.

Port Mirror

Support

Port Rate Limit

Support port ingress and egress rate limit

 

 

Link Aggregation

Support manual link aggregation

Support LACP dynamic link aggregation

Supports up to 8 aggregation groups,each group up to 8 ports

Support source MAC,destination MAC, source destination MAC,source IP,destination IP,source destination IP routing strategy

Port Isolate

Support

Jumbo Frame

Support up to 10KB packet

Cable Distance Diag

Support

Redundant Port

Support

The DDM of fiber ports

Support

MAC

MAC Table Capacity

8K

MAC Table Management

Support

Forwarding mode

Support IVL forwarding mode

Static MAC Address

Support

MAC Address Binding

Support

MAC Address Filtering

Support

MAC Learning Control

Control the MAC learning based on port

VLAN

Number of VLANs

4K

802.1q-based VLAN

Support

MAC-based VLAN

Support

IP-based VLAN

Support

Protocol-based VLAN

Support

PVLAN

Support

Voice VLAN

Support

VLAN Mapping

Support 1:1 mapping

QinQ

Support basic QinQ

Support flexible QinQ

Reliability

Spanning Tree Protocol

Support STP/RSTP/MSTP

Port Loop Detection

Support

EAPS

Support RFC3619

ERPS

Support G.8032/Y.1344

LLDP

Support LLDP & LLDP-MED

UDLD

Fully compatible with CISCO's UDLD protocol

IP

ARP

Support static and dynamic ARP

IP Route

Support 0.0.0.0/0 route and other static route,but can’t support L3 forwarding

VLAN Interface

Support 32 VLAN interfaces

Multicast

Static Multicast MAC Address

Support

IGMP SNOOPING

Support

MLD SNOOPING

Support

MVR

Support

GMRP

Support

ACL

Standard IP-based ACL

Support

Extended IP based ACL

Support

MAC IP-based ACL

Support

MAC ARP-based ACL

Support

IPv6-based ACL

Support

ACL Port Filtering

Support

Time-based ACL

Support

QoS

Port Queue Number

8

Port Queue Scheduling Mode

Support WRR, SP, WFQ

Port-based Classification

Support

802.1p-based Classification

Support

DSCP-based Classification

Support

ACL-based Classification

Support

 

 

QoS Policy

Support packets mapping to queue

Support COS or DSCP Remarking

Support rate limits of data flow

Support data flow statistics

Support mirroring of data flow

DHCP

DHCPv4 Client

Support

DHCPv6 Client

Support

DHCP Snooping

Support

DHCP Relay

Support

DHCP Server

Support

DHCP option 82

Support

Management

 

 

CLI  Management

Support Console, TELNET and SSH

Support multiple TELNET connections based on IPv4 and IPv6

Support multiple SSH connections based on IPv4 and IPv6

Support running configuration rollback

Support ZTP (Zero Touch Configuration)

WEB Management

Support

 

SNMP Management

Support SNMP v1, v2c, v3

Support SNMP TRAP

Support lots of standard and private MIBs

Support SNMP based on IPv4 and IPv6

User Management

Support multiple user management

 

 

TACACS+

Support switch authentication via TACACS+ server remote username and password

Support password encryption in PAP and CHAP mode

Support TACACS+ server to authorize the switch’s commands

Support TACACS+ based on IPv4 and IPv6

Log Management

Support local log management

Support SYSLOG based on IPv4 and IPv6

RMON

Support RMON 1, 2, 3 and 9 groups

 

Cluster Management

Support NDP

Support NTDP

Support manual and automatic joining of cluster groups

Support cluster unified management

OAM

Support 802.3ah

Support 802.1ag

 

Configuration File

Support TFTP transmission based IPv4 and IPv6

Support SFTP transmission based IPv4 and IPv6

Support SFTP Client and SFTP Server

Upgrade software

Support TFTP transmission based IPv4 and IPv6

Support SFTP transmission based IPv4 and IPv6

Support SFTP Client and SFTP Server

Clock Management

Support local clock management

Support SNTP based IPv4 and IPv6

Security

 

Switch Management Security

Support enabling and disabling TELNET, SSH, WEB and SNMP services

Support TELNET, SSH, WEB and SNMP services to bind to standard IP ACLs

Support for limiting the number of TELNET connections

CPU Protection

The switch's own security protection prevents large data streams from attacking the switch itself.

 

 

AAA

Support 802.1x

Support RADIUS

Supports authentication, authorization, and accounting through RADIUS server

Support port-based and MAC-based 802.1x

Support 802.1x guest VLAN

IP MAC Binding

Support static configuration of IP, MAC and port binding

 

DHCP SNOOPING

Support dynamic ARP binding to prevent ARP spoofing

Support dynamic IP, MAC and port binding

Support fixed port to connect to DHCP server to prevent private connection to DHCP server

 

 

Prevent ARP Spoofing

Support manually configuring MAC ARP-based ACL rules to prevent ARP spoofing.

Support the DHCP SNOOPING function. During the process of obtaining an IP address by DHCP,the switch dynamically binds ARP to the port to prevent ARP spoofing.

IPv6

IPv4/IPv6 Dual Protocol Stack

Support

 

IPv6 Address

Support manual address configuration, stateless address auto-configuration and stateful address configuration obtained through DHCPv6 client

IPv6 Neighbor Discovery

Support

ICMPv6

Support

IPv6 Path MTU Discovery

Support

Debugging

PING

Support

PING6

Support

TRACEROUTE

Support

TELNET Client

Support TELNET client based IPv4 and IPv6

SSH Client

Support SSH client based IPv4 and IPv6

TWAMP

Support TWAMP server and session-reflector


Ordering Information

Model

Description       

Z-IMS-2GX8GT-SFP

Industrial Layer 2+ Managed 8x10/100/1000Base-T+2x1000Base-X SFP

Pls note the Industrial Power Supply and Industrial SFP Transceiver need to be ordered seperatly


Technical Support: 聚成网络科技 | Admin Login
×
seo seo