|
Industrial L2+ 24-Port 10/100/1000Base-T PoE+4-Port 1000Base-X SFP Managed Ethernet Switch
Industrial L2+ 24-Port 10/100/1000Base-T PoE+4-Port 1000Base-X SFP Managed Ethernet Switch
Hardware Specifications Fixed Port | 24x10/100/1000Base-T PoE PSE RJ45 Ports+4x1000Base-X SFP Slots+1xConsole Port | Standard Compliance | IEEE802.3:10Base-T IEEE802.3u:100Base-TX Fast Ethetnet IEEE802.3ab:1000Base-T Gigabit Ethernet IEEE 802.3z:1000Base-SX/LX Gigabit Ethernet IEEE802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree protocol IEEE 802.1w Rapid Spanning Tree protocol IEEE 802.1s Multiple Spanning Tree protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3az Energy Efficient Ethernet RFC 768 UDP RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 ITU G.8032 ERPS Ring | Switch Properties | Switching Capacity: 56Gbps MAC Address Table: 8K Packet Buffer Size:4M Packet Forwarding Rate: 41.67Mpps@64bytes Jumbo Frame:10K Flow Control:IEEE802.3x flow control in full-duplex mode and back pressure in half-duplex mode Switching mode: Store and Forward(full wirespeed) | Network Medium | 10Base-T: Cat3,4,5 UTP(≤100 meters) 100Base-T: Cat5 UTP or better(≤100 meters) 1000Base-T: Cat5e,6 UTP or better(≤100 meters) | Fiber Port | 4x1000Base-X SFP | PoE Description | PoE Port:24x10/100/1000Base-T PoE PSE RJ45 PoE Standard:IEEE802.3af/at PoE/PoE+ PSE Power Pin Assignment:1/2+,3/6-(End Span) PoE Power Output:Max 30W per port | Transmission Distance | Twisted pair: 0-100m(CAT5e/CAT6) Fiber Optic:0-80km(Based on Industrial Optical Transceiver choose) | Power Requirements | Input Voltage: Redundant dual DC48~56V Connector: Removable 6 pin Termina Block Protection:Overload protection/Reverse polarity protection/Redundancy prodection | Mechanical | Case: High-strength Aluminum Alloy IP Rating: IP40 protection Cooling way: Fanless design,natural cooling Dimension: 155x128x88mm(LxWxH) Weight: 1.35Kg Installation: DIN-Rai/Wall Mounted | Environmental | Working Temperature: -40°C~+80°C Storage Temperature:-40°C~+85°C Working Humidity: 5%~90% (non-condensing) Storage Humidity: 5%~95%(non-condensing) | Industry Standard | EMI:FCC Part 15 Subpart B Class A,EN 55024 EMS: IEC61000-4-2(ESD):±8kV Contact discharge,±15kV Air discharge IEC61000-4-3(RS):10V/m(80~1000MHz) IEC61000-4-4(EFT): Power Port:±4kV; Data Port:±2kV IEC61000-4-5(Surge):Power Port:common mode±4kV/differential mode±2kV; Data Port:common mode±6kV/differential mode±4kV IEC61000-4-6((Radio frequency conduction): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-8(Power frequency magnetic field):100A/m;1000A/m ,1s to 3s IEC61000-4-9(Pulsed magnet field):1000A/m IEC61000-4-10(Damped oscillation):30A/m 1MHz IEC61000-4-12/18(Shockwave):CM 2.5kV,DM 1kV IEC61000-4-16(Common mode conduction):30V (cont.), 300V (1s) Shock:IEC 60068-2-27 Free fall:IEC 60068-2-32 Vibration:IEC 60068-2-6 | MTBF | 100,000 hours | Warranty | 3 years |
Software Specifications Spanning Tree Protocol | Support STP/RSTP/MSTP/ERPSv2 | Link Aggregation | IEEE 802.3ad LACP and static trunk Supports 8 groups with 8 ports per trunk | Multicast | Support IGMP Snooping V1/V2/V3,GMRP,GVMP,802.1Q | VLAN | Support IEEE 802.1Q 4K VLAN,QINQ,Double VLAN | Time Management | SNTP | QOS | Flow-based redirection Flow-based rate limiting Flow-based packet filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS, Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR, SP+WRR) | ACL | Port-based Issuing ACL ACL based on port and VLAN L2 to L4 packet filtering, matching the first 80 bytes message Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN etc | Diagnostic Maintenance | Support port mirroring, Syslog, Ping | Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE, LLDP, DHCP Server/Client(IPv4/IPv6) | PoE Management | Per port PoE function enable/disable Total PoE power budget control Per PoE port power allocation PD classification detection PD alive check Scheduled power rebooting PoE schedule PoE Port Status monitoring PoE port power feeding priority | Alarm Management | Support 1 way relay alarm output, RMON, TRAP | Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 Support DHCP Snooping,Option 82,802.1X security access, Support user hierarchical management, ACL access control list, Support DDOS,port-based MAC filtering / binding, MAC black holes, IP source protection, Port isolation, ARP message speed limit | Advanced Layer 2+ Features | IPv4/IPv6 Management Static Route |
Ordering Information Model | Description | Z-IMS-4GX24GP-SFP | Industrial Layer 2+ Managed 24x10/100/1000Base-T PoE PSE+4x1000Base-X SFP | Pls note the Industrial Power Supply and Industrial SFP Transceiver need to be ordered seperatly |
|
|
