24x10/100/1000Base-T PoE PSE RJ45 Ports+8x1000Base-X SFP Slots+4x10GBase-X SFP+ Slots+
1xConsole Port
Standard
Compliance
IEEE802.3:10Base-T
IEEE802.3u:100Base-TX Fast Ethetnet
IEEE802.3ab:1000Base-T Gigabit Ethernet
IEEE 802.3z:1000Base-SX/LX Gigabit Ethernet
IEEE 802.3ae:10GBase-X
IEEE802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree protocol IEEE 802.1w Rapid Spanning Tree protocol IEEE 802.1s Multiple Spanning Tree protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3az Energy Efficient Ethernet RFC 768 UDP
RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2
RFC 2328 OSPF v2 RFC 1058 RIP v1 RFC 2453 RIP v2
ITU G.8032 ERPS Ring
Switch Properties
Switching Capacity: 598Gbps/non-blocking
MAC Address Table:32K
Packet Buffer Size: 32M
Packet Forwarding Rate: 107.14Mpps@64bytes
CPU:500MHz
DRAM: 2G
Flash:128M
Jumbo Frame: 9.6K
Flow Control:IEEE802.3x flow control in full-duplex mode and backpressure in half-duplex mode
Switching mode: Store and Forward(full wirespeed)
Network Medium
10Base-T: Cat3,4,5 UTP(≤100 meters)
100Base-T: Cat5 UTP or better(≤100 meters)
1000Base-T: Cat5e,6 UTP or better(≤100 meters)
Uplink Port
4x10GBase-X SFP+
PoE Description
PoE Port:24x10/100/1000Base-T RJ45
PoE Standard:IEEE802.3af/at PoE/PoE+ PSE
Power Pin Assignment:1/2+,3/6-(End Span)
PoE Power Output:Max 30W per port
Transmission Distance
Twisted pair: 0-100m(CAT5e/CAT6)
Fiber Optic:0-80km(Based on Industrial Optical Transceiver choose)
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring
Bidirectional data mirroring based on port
QoS
Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL
Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security
IEEE802.1X & MAC address authentication
Broadcast storm control, Backup for host datum
SSH 2.0, SSL, Port isolation, ARP message speed limit
User hierarchical management and password protection